1. Lubricate Moving Parts

A good rule of thumb is to lubricate your garage door’s moving parts at least twice a year. This includes springs, rollers, hinges, and tracks. Use a high-quality garage door lubricant—avoid using WD-40 as it can attract dirt and dust. A few spritzes in the right places can often silence those squeaks.

2. Tighten Loose Nuts and Bolts

Garage doors are full of nuts, bolts, and screws, all of which can loosen over time due to vibrations. Grab a wrench and go over the entire system. Make sure everything is secure without overtightening, which could cause more damage.

3. Inspect and Replace Worn Rollers

Rollers can wear out and become noisy. If they appear worn or damaged, consider replacing them. Nylon rollers tend to be quieter than metal ones and are often a worthwhile upgrade.

4. Check the Hinges

Hinges can also be a source of noise. If they look worn, it might be time for a replacement. You’ll find that newer hinges often operate more smoothly and quietly.

5. Balance the Door

An unbalanced door can put extra strain on components and create noise. Disconnect the opener by pulling the release handle, then manually lift the door halfway. If it stays put, it’s balanced; if it falls, the springs need adjustment. In this case, it’s best to call in a professional to tackle the job safely.

6. Clear the Tracks

Sometimes, debris in the tracks can cause noise. Make sure they’re clear of dirt and obstructions. Use a damp cloth to wipe down the tracks, but avoid lubricating them as this can attract more gunk.